Cool Skydiving Picture
 
Voodoo
Voodoo

VoodooCurv
Voodoo Curv

VoodooOptions
Voodoo Options


Voodoo
Talon Voodoo
Talon Voodoo

Talon Voodoo-side view The Container:

The heart of the design is the shape of the container system. The profile of the container is curved from the top of the reserve to the bottom of the main resulting in a completely aerodynamic shape that slices through the air no matter what the attitude of the jumper in freefall. The container closing flaps are designed to be easy to use yet completely secure in freefall.

The reserve protector flap has been completely re-designed to use the most secure tongue combination in use today. The side tongues hold completely and the bottom pocket smoothes out the profile and keeps any lines from snagging. The internal pin pocket protects the pin from being dislodged.

The main pin protector flap is a streamlined variation of the upward closing flap pioneered on the Telesis 2 and the Genera. Longer and more tapered than its predecessors, it provides complete security and ease of use.

The main side flaps and riser covers have been integrated into one piece units that provide maximum coverage and protection while resulting in an aesthetically pleasing design that compliments the lines of the rig.

The BOC throw-out installation is integrated into the bottom main flap in such a way that the main bridle is completely covered without the need of special flaps or covers. A ZP main pilot-chute with a hackey or freefly handle and kill-line bridle is standard. For those who prefer a pull-out (POP) deployment, easy to grip completely secure handle falls readily to hand.

The backpad has been designed to integrate with the reconfigured harness to provide a new level of comfort and fit. A completely new yoke area provides a hinge at the top of the container resulting in a better fit over the shoulder. Additional padding makes comfort a key word in the Voodoo design.

Full metal 3-ring housings are standard. Both the 3-ring and reserve ripcord housings have been lengthened and are attached to their pockets with clamps. The cables remain fully covered and protected in all attitudes at all times.

The reserve container: The reserve deployment bag has been designed to allow even greater ease of packing. At the same time, it provides a firm base for the Stealth pilotchute and contributes to even better launches than what the Stealth is known for.

The Harness:

The harness design and geometry have been designed to provide a level of fit and comfort unmatched by any other to date! The yoke area has been lengthened as well as the upper main lift web (MLW) to lower the 3-ring position and the chest strap. The angle of the yoke has been re-shaped and tailored to provide maximum security and comfort in a head down position.

The Multi-Flex harness configuration is standard provided an unequaled level of comfort and flexibility. New custom built ring hardware made specifically for RI and this application is used in the chest position. This hardware is forged flat and eliminates he pressure points and discomfort associated with previous designs. At the same time its use results in better articulation and freedom of movement in all attitudes.

The "in-set" horizontal back strap has been designed to "snug" the container to the body.

The lower main lift web/leg strap configuration features a totally new design that results in an unparalleled level of fit and comfort. Call the "V-Flex" configuration, it provides fully independent adjustment around the upper leg while at the same time total articulation around the hip ring. Coupled with our well known double-wide leg strap/pad design, the comfort must be experienced to be believed. - Ask any Voodoo owner!

Standard Features Include:

  • Mult-Flex Harness
  • V-Flex Leg Strap Configuration
  • In-set Horizontal Back Strap
  • Contoured Backpad
  • Anti-Twist Risers
  • ZP Main Pilot Chute
  • Kill-Line Bridle
  • Hackey Handle
  • Velcroless Toggles
  • Custom RC Embroidery

Order Form Get Acrobat


15% OFF! Save 15% off the manufacturer's suggested retail price. See the "Square One Price" below for final sale price. Discount does not include any additional options.

Item Number Description Price Square One
Price
Quantity Add to Cart
I-5200004 RI Voodoo (Articulation) 2,450.00 2,082.50 cart
I-5200005 RI Voodoo (Articulated Harness & Full SS) 2,650.00 2,252.50 cart
I-5200006 RI Voodoo (Articulation, Full SS & Spacerfoam) 2,800.00 2,380.00 cart
Voodoo

Voodoo    Voodoo Curv    Voodoo Options    Top
VoodooCurv
Voodoo Curv
Voodoo Curv

Voodoo Curv-side view The Container:

The Voodoo Curv design allows a smooth airflow over the back of the rig and jumper in any freefall attitude.

The Voodoo Curv incorporates the Bio Curv backpad where the profile of the backpad, instead of being straight, is curved inward at the midpoint and follows the natural curve of the back. This allows the containers to hug the back intimately and eliminate the gap between the back and the rig. This then allows for an increase of approximately 10% in the available volume for each main container size with no increase in width or length.

A totally new concept is the “Bio-Yoke” configuration (Patent Pending). This design concept incorporates a secondary shoulder yoke that holds the containers higher on the back and relieves the pressure of the regular shoulder yoke with its associated webbing and hardware. The Bio-Yoke spreads the load evenly across the back and shoulders.

The fit of the Voodoo Curv is more akin to wearing a vest or backpack than putting on an older style rig. With the distribution of the weight across the entire back, the perceived weight of the system is less than the actual weight.

The inside of the yoke and leg pads are built with an inside seam resulting in greater comfort. The main container side flaps incorporate specially designed end tabs that result in a lower profile of the main container.

The Harness:

The Voodoo harness has become the standard of the world for fit, comfort and strength. The upper harness is built from TY-8 webbing for comfort and flexibility. The leg straps are built from TY-7 webbing backed with TY-12 to preclude slippage of the stainless leg adapters. Stainless steel mini ring hardware is standard for looks and durability. All housings are completely fabric for looks and utilize stainless steel clamps for security.

The 3-ring geometry has been changed to slightly lower the 3-ring location for a more comfortable seated position during canopy flight.

The lower hip ring geometry has been changed to allow more flexibility of the horizontal back strap, allowing the containers to seek a more natural location on the back.

The leg strap junction has been totally re-designed to provide greater comfort and security around the upper thigh. This holds the leg strap and pad in place and prevents them from sliding down the leg in freefall. This virtually eliminates the need for the “bungee” cross connector.

The chest strap incorporates a webbing stow band to replace the elastic keepers that stretch out of shape or get lost.

The lower main lift webs incorporate slim line modular pockets for the 3-ring release and reserve ripcord. The pockets also protect the lift web webbing from wear, abrasion and ultra violet degradation, and allow the main lift webs to stretch under high “G” loads, preventing hard pulls of the reserve and 3-ring release.

Standard Features Include:

  • TY-17 risers with stainless steel hardware, Velcroless toggles, dive loops, and anti-twist cable tubes are standard. Standard length is 20” with custom lengths available at no additional charge.
  • The standard main deployment configuration is a BOC throw-out pilot chute with a Hackey and kill-line collapsible bridle.
  • BOC pocket stowage flap that helps keep the pilot chute from creeping out and positions the handle in the same place every time.
  • A metal mini trapezoidal ripcord handle is standard with a pillow or loop handle optional. The pillow ripcord and 3-ring release handle come standard with rubberized “Sure-Grip” fabric for a better grip under all conditions.
  • A specially designed loop is built into the top reserve flap which allows attachment of a custom designed magnetic slider stow without interfering with the operation of the reserve.
  • A high impact hook knife and pocket is integrated into the right side main lift web cover and 3-ring release pocket.

Order Form Get Acrobat


15% OFF! Save 15% off the manufacturer's suggested retail price. See the "Square One Price" below for final sale price. Discount does not include any additional options.

Item Number Description Price Square One
Price
Quantity Add to Cart
I-5200015 RI Voodoo CURV (Articulation, Full SS, Spacerfoam) 2,975.00 2,528.75 cart
VoodooCurv

Voodoo    Voodoo Curv    Voodoo Options    Top
VoodooOptions
Voodoo Options
from Rigging Innovations

Rigging Innovations' Voodoo comes already loaded up with items that are extra-cost options on other harness/container systems. The only extra cost options are stainless steel hardware and various monograms and logos.


Item Number Description Price Quantity Add to Cart
I-5200070 RI Spacerfoam (Backpad & Leg pads) 150.00 cart
I-5200080 RI Monogram 30.00 cart
I-5200130 RI Magnetic Slider Stow-Black (w/Velcro attachment) 40.00 cart
VoodooOptions

Voodoo    Voodoo Curv    Voodoo Options    Top
Sales@Square1.com
TOLL-FREE ORDER LINE:
1-800-877-7191 (US Only)
Voice: 951-657-8260
Fax: 951-696-5961

Mail to: Square One
25819 Jefferson Ave. #140
Murrieta, California 92562 USA

Another cool Skydiving picture


Advanced Search

currency converter

Square One
TOLL-FREE ORDER LINE 1-800-877-7191 (US Only)
Email sales@Square1.com
Voice 951-657-8260
Fax 951-696-9561

Square One Parachute Sales & Service, Inc.
25819 Jefferson Ave. #140, Murrieta, California 92562 USA


Valid HTML 4.0
Valid CSS