The ARGUS is a 3rd generation electronic and pyrotechnic safety device for parachutists. Its primary task is to activate a pyrotechnic loop cutter at an altitude and speed by which you reasonably may expect that if the parachutist's reserve parachute is not activated, this could result in serious injury or even death.

No less than 3 independent laboratories have been freezing, frying, shaking and drowning the Argus.

Top-notch skydivers have been helping with the field testing. The Argus is the choice of US videographer Mike McGowan and world-renowned organizer Tony Domenico. The British all-round skydiver Alastair McCartney and the Dutch hot-shot swooper Henny Wiggers are real Argus believers. Henny logged over 700 jumps in Swoop mode in less than one year. In Empuriabrava, you'll find Alain Donny and Vincent Van Laethem using it. The Dutch parachute center of Teuge and the French parachute center of Maubeuge are official partners.

Item Number	Description	Price	Quantity	Add to Cart
I-3518000	Argus AAD 1-pin	1,095.00
I-3518100	Argus Battery (set of 2)	22.50

The CYPRES 2 is the second generation of microprocessor controlled, automatic activation devices specifically designed for sport skydiving. The control unit has a single button used to calibrate the unit for your take off and landing altitudes. The Cypres 2 has all the proven features of the original Cypres, which include:

• activation altitudes
• activation velocities
• user interface (single push button)
• loop cutting system
• CYPRES closing loop
• 14 hours run time

Item Number	Description	Price	Quantity	Add to Cart
I-3514100	Cypres-2 AAD (1-Pin) Expert	1,475.00
I-3515000	Cypres-2 AAD (2-Pin) Expert	1,620.00
I-3515100	Cypres-2 AAD (1-Pin) Student	1,520.00

Replacement battery pack for the original Cypres models. NOTE: Cypres 2 models do not require a battery change.

Item Number	Description	Price	Quantity	Add to Cart
I-3514300	Cypres-1 Batteries	90.00

Field replaceable cutter for all Cypres models. Available in 1-Pin or 2-Pin configurations.

Item Number	Description	Price	Quantity	Add to Cart
I-3514700	Cypres-2 (1-Pin) Cutter	150.00
I-3514750	Cypres (2-Pin) Cutter	270.00

The VIGIL II is the second generation of the original Vigil AAD. It is a microprocessor controlled, automatic activation device specifically designed for sport skydiving. The Vigil's primary purpose: TO SAVE LIVES.

Once it is switched on, the Vigil® performs a complete self test to check all internal parameters and calibrates itself at the atmospheric pressure of the DZ altitude.

The Vigil® is now ready for use and is in “stand-by” status (recalibrating itself every 32 secs). During taking off, the Vigil® will go to an “active” status once it reaches 150 ft. in a time of max. 32 sec. From that moment on your Guardian Angel is ready to help you in a critical situation. The Vigil is now in active status, taking measurements 64 times per sec.

Accurate Calculation: Once the door opens and you leave the plane, the Vigil® will calculate the time left over before reaching the activation altitude (for example: 840 ft in PRO mode), by continuously measuring your falling speed and your altitude. The Vigil® takes into consideration speed variations during freefall and recalculates every 1/8th of a second the time left over to reach the activation altitude. When you reach the activation altitude (time = 0) and if you're still falling at a speed above 75MPH , the Vigil® will activate the cutter instantaneously to allow your reserve parachute to deploy. This patented method gives a very accurate activation altitude (+/- 60 feet).

Vigil® works by permanent recalculation of the time left before activation.

Item Number	Description	Price	Quantity	Add to Cart
I-3517050	Vigil-2 AAD 1-pin	1,199.00
I-3517200	Vigil AAD Power Pack "Battery"	125.00
I-3517300	Vigil AAD Cutter	185.00
I-3517400	Vigil AAD Control Unit	250.00